For general contractors and remodelers
Measure Once, Bid from the Plan: Floor Plans and Remodel Estimates
vPlan AR gives general contractors and remodelers an as-built floor plan from a single site walk: scan with an iPhone Pro or iPad Pro (or Measure Room, beta, on Android and other iPhones), export DXF for your designer or drafter, and write the remodel estimate from the plan: what the client wants in each room, line items with quantities taken from the measurements, priced from your own rate card, with overhead and profit when the job takes three or more trades.
Why general contractors and remodelers switch to LiDAR floor plans
Extra measure-up visits
Going back to site because a dimension is missing costs a half-day. A full scan captures every wall, opening and room in one pass.
Hand sketches that don’t close
Corner errors, wall offsets and transposed numbers on paper sketches become rework later. Scanned plans are geometrically consistent.
Bids built in a spreadsheet
Copying room sizes into a spreadsheet and working out wall area, floor area and trim lengths by hand is slow, and one typo reprices the job. vPlan AR takes the quantities from the plan.
How it works
Scan at the site walk
Capture the existing space room by room, including multiple levels, while you walk the job with the client.
Clean up on the web
Open the project in the browser editor to correct walls, add labels, doors, windows and furniture, and check dimensions on a large screen.
Hand off DXF or PDF
Export DXF with walls, openings, labels and dimensions on separate layers for AutoCAD or DraftSight, or a dimensioned PDF for the client.
Write the bid
In the Remodel estimate, write what the client wants done in each room and add lines from the Remodel pack (demolition, cabinets, countertops, tile, fixtures, electrical and plumbing, permit and dumpster allowances) or your own items, or let Draft with AI write a first version. Quantities follow the plan; export the Remodel Estimate as PDF, CSV or Excel.
What you can deliver
As-built DXF
Pro+Layered CAD file ready for your designer, drafter or engineer.
Dimensioned PDF plan
All plansTrue-scale plan sheet with room sizes, ceiling heights, exterior dimensions and door and window sizes (one level, watermarked on Free; every level in one set on Pro).
Remodel estimate
Pro+A contractor’s bid by room: work requested, line items priced from your rate card, the finishes chosen for each room, contingency, and 10% overhead and 10% profit when the job takes three or more trades (change the rates, or include or leave it out for a bid).
Material takeoff
Pro+Floor, wall and ceiling areas, perimeters and trim lengths per room, with flooring, paint, drywall and baseboard quantities to order.
3D model (GLB, USDZ, OBJ)
Pro+Export the plan as a 3D model, with walls cut at doors and windows, for visualization, a client walkthrough in AR on an iPhone, or downstream modeling tools.
Which plan do general contractors and remodelers need?
Most contractors start on Pro ($19/month) for unlimited projects, DXF and estimates. Companies with estimators and project managers sharing projects, or that want the REST API and webhooks to pull measurements into their own software, choose Business ($39/month). Compare plans.
Connect the software you already use
Plans can flow into your project management and estimating software through the vPlan AR API and webhooks on Business, or as open files (PDF, DXF, IFC, CSV, Excel). See integrations or ask your software vendor.
Sample files for general contractors and remodelers
Exported on the Pro plan from the sample house, a drawn example project with a sample claim (not a real property or client). Free plan PDFs are one level and watermarked.
- Schedules and material takeoffExcelRooms, doors, windows and damage schedules, and the finish takeoff: flooring with waste, paint in gallons, baseboard, as numbers a spreadsheet can sum.Download sample ↓
- Architectural plan setPDFCover sheet with sheet index and area summary, a true-scale 1/4" = 1'-0" floor plan with dimensions, room tags and door and window sizes, and schedules with the finish takeoff. Tabloid, 3 sheets.Download sample ↓
Watch how it works
Short, narrated videos recorded in the real web editor. All video tutorials.
1:55Video 3Write a scope of work with line items
1:38Video 4A preliminary repair estimate from your own rates
2:09Video 2The same basement: the reconstruction estimate, with overhead and profit
1:59Video 6Kitchen remodel: a bid from what the client wants
1:44Video 7Bathroom remodel: allowances and the client's choices
1:39Video 8A single-trade job: a flooring estimate
Frequently asked questions
Can I get an as-built floor plan from a phone scan?
Yes. vPlan AR scans existing rooms with the LiDAR sensor on iPhone 12 Pro and newer Pro models or iPad Pro, and exports the as-built as a layered DXF or dimensioned PDF. For permit drawings, confirm your jurisdiction’s requirements; many accept a scaled as-built plan prepared from a scan. On Android phones and iPhones without LiDAR, Measure Room (beta) measures each room with the camera; check a wall or two with a tape before you build from it.
What CAD programs open vPlan AR DXF files?
Programs that open DXF files, such as AutoCAD and DraftSight, and many estimating tools. Walls, doors, windows, room labels and dimensions are on separate layers.
Can I write a remodel bid from the floor plan?
Yes, on Pro and Business. Open the Scope tab in the web editor and choose the Remodel estimate. Add the rooms in the job, write what the client wants done in each (Work requested), and add lines from the Remodel pack or your own rate card items; a line’s quantity can be a formula over the room’s measurements, such as F for floor area or PF for the floor perimeter, so it follows the plan. Draft with AI can write a first version from the work requested and the finishes chosen, as a contractor’s bid with no damage language. Export it as a Remodel Estimate (PDF, CSV or Excel). The starter rates are rough US figures: replace them with your own before you send a bid.
How does overhead and profit work on an estimate?
By default an estimate adds 10% overhead and 10% profit, on the subtotal plus contingency, when its lines take three or more trades (drywall, painting, flooring, tile, cabinetry, plumbing, electrical and so on). Change the percentages in Settings → Estimate Rate Card, and for each export choose Automatic (3 or more trades), Include or Leave out. The estimate lists the trades it counted.
Can I edit the scan on my computer?
Yes. Scans sync to your account on every plan, Free included. Sign in at vplan.ai to open the project in the web editor, then adjust walls, openings, labels and dimensions.
Does vPlan AR replace a surveyor?
No. LiDAR scans are typically accurate within 1–2 cm per room dimension — excellent for remodeling, estimating and as-builts — but boundary, structural or legal surveys still require a licensed professional.
Guides for general contractors and remodelers
- Overhead and Profit on Insurance Estimates: the Three-Trade RuleOverhead and profit is the general contractor's share of a repair estimate. Here is what 10 and 10 means, the three-trade convention and its limits, what counts as a trade, and how to calculate and document it.
- How to Write a Remodel Estimate from a Floor PlanA remodel bid is only as good as the measurements under it. Here is how to go from a measured floor plan to a room-by-room estimate: scope, quantities, allowances, contingency, and overhead and profit.
- 5 Floor Plan Mistakes That Cost Contractors Time and MoneyThese five common floor plan errors show up repeatedly on job sites — and each one creates rework, disputes, and wasted materials.
- How to Create an As-Built Floor Plan for a Building Permit ApplicationA permit application starts with a plan of what is there now. Here's how to scan, verify, and export an as-built floor plan a plan reviewer can follow.
- DXF vs PDF vs OBJ vs XML: Which Floor Plan Export Format Do You Need?Same scan, four very different files. Here's what each format is actually for, who should be opening it, and how to stop guessing which one to attach to the email.
- How to Generate a Repair Cost Estimate from a Floor Plan ScanTurn a LiDAR scan into a material takeoff and a line-item cost estimate. Tag the affected materials, apply your own unit prices, and export to PDF or CSV.
Free calculators
Scan your first property free
The Free plan includes 2 projects per month. No credit card required.
Get Started Free