How to Write a Water Damage Scope of Work (Line Items, Flood Cuts)

Claims & inspections · video 3 of 6 · 1:55 · Watch on YouTube

How to write a water damage scope of work in vPlan AR's web editor: draft it with AI from the damage you recorded, then check and edit line items whose quantities are formulas over the room (floor, walls, perimeter), so a 2 ft flood cut and the drywall above it follow the plan. Add lines from the water mitigation, general repair and adjuster packs, or your own items.

In this video

  1. Record the damage on each room first, under Condition & Damage
  2. Open the Scope tab and click Draft with AI: a summary, a narrative per room and line items (one AI message)
  3. Check on site lists what the draft assumed
  4. Each line has an action, a description, a quantity and unit, and your rate
  5. Quantities are formulas: F for the floor, W for the walls less doors and windows, PF for the perimeter (a 2 ft flood cut is PF in linear feet; the drywall to replace is PF*2)
  6. Lines update when the plan changes
  7. Add lines from the water mitigation, general repair and adjuster packs or your own items, or add a whole pack
  8. The scope prints in the Damage / Scope Report, and the cost estimate prices it

Transcript

A scope of work turns the damage into the work to do. In vPlan it's built room by room, from your measurements.

Record the damage first: select a room, and fill in Condition and Damage.

Then open the Scope tab. Draft with AI writes a summary, a narrative for each damaged room, and line items with quantities. It uses one AI message.

The draft is a starting point. Check on site lists what it assumed, so you know what to confirm.

Each line has an action, like remove and replace, a description, a quantity and a unit, and your rate.

A quantity can be a formula over the room. F is the floor, W is the walls less the doors and windows, and PF is the perimeter. A two foot flood cut is PF, in linear feet, and the drywall to replace is PF times two.

When you click into a formula, the measurements you can use appear below it.

Because quantities are formulas, they update when the plan changes. Move a wall, and the drywall and baseboard follow.

To add work, pick a line from Add a line, from the water mitigation, general repair and adjuster packs, or your own items. Or add a whole pack at once.

Water mitigation covers extraction, flood cuts, antimicrobial, air movers and dehumidifiers per day, and moisture monitoring.

Edit any description or quantity, or remove a line you don't need. The scope total updates as you go.

The scope prints in the Damage / Scope Report, and the cost estimate prices it.

The scope of work is part of Pro and Business.

Next: turning the scope into a repair estimate with your own rates.