How to Write a Water Damage Scope of Work (Line Items, Flood Cuts)
Claims & inspections · video 3 of 6 · 1:55 · Watch on YouTube
How to write a water damage scope of work in vPlan AR's web editor: draft it with AI from the damage you recorded, then check and edit line items whose quantities are formulas over the room (floor, walls, perimeter), so a 2 ft flood cut and the drywall above it follow the plan. Add lines from the water mitigation, general repair and adjuster packs, or your own items.
In this video
- Record the damage on each room first, under Condition & Damage
- Open the Scope tab and click Draft with AI: a summary, a narrative per room and line items (one AI message)
- Check on site lists what the draft assumed
- Each line has an action, a description, a quantity and unit, and your rate
- Quantities are formulas: F for the floor, W for the walls less doors and windows, PF for the perimeter (a 2 ft flood cut is PF in linear feet; the drywall to replace is PF*2)
- Lines update when the plan changes
- Add lines from the water mitigation, general repair and adjuster packs or your own items, or add a whole pack
- The scope prints in the Damage / Scope Report, and the cost estimate prices it
Transcript
A scope of work turns the damage into the work to do. In vPlan it's built room by room, from your measurements.
Record the damage first: select a room, and fill in Condition and Damage.
Then open the Scope tab. Draft with AI writes a summary, a narrative for each damaged room, and line items with quantities. It uses one AI message.
The draft is a starting point. Check on site lists what it assumed, so you know what to confirm.
Each line has an action, like remove and replace, a description, a quantity and a unit, and your rate.
A quantity can be a formula over the room. F is the floor, W is the walls less the doors and windows, and PF is the perimeter. A two foot flood cut is PF, in linear feet, and the drywall to replace is PF times two.
When you click into a formula, the measurements you can use appear below it.
Because quantities are formulas, they update when the plan changes. Move a wall, and the drywall and baseboard follow.
To add work, pick a line from Add a line, from the water mitigation, general repair and adjuster packs, or your own items. Or add a whole pack at once.
Water mitigation covers extraction, flood cuts, antimicrobial, air movers and dehumidifiers per day, and moisture monitoring.
Edit any description or quantity, or remove a line you don't need. The scope total updates as you go.
The scope prints in the Damage / Scope Report, and the cost estimate prices it.
The scope of work is part of Pro and Business.
Next: turning the scope into a repair estimate with your own rates.


