How to Scope a Ceiling Water Stain: Partial Damage, Line by Line

Scoping & estimating · video 3 of 8 · 1:51 · Watch on YouTube

How to scope water damage that covers only part of a room with vPlan AR: record a ceiling stain from a leak upstairs, draft a small mitigation and a reconstruction that repairs only the stained area, with judgement quantities kept as numbers and the paint taken to the whole ceiling so it matches. Then check and edit each line.

In this video

  1. Record the damage and note its size: a stain about 3 ft across
  2. A small mitigation draft: open the wet ceiling and dry the bay above
  3. The reconstruction repairs only the stained area, not the whole ceiling
  4. Judgement quantities stay numbers with how they were reached; lines that follow the room keep a formula
  5. Paint the whole ceiling so it matches, and the line says why
  6. Edit quantities and formulas; a typed number replaces the formula
  7. Two trades, drywall and painting: no overhead and profit

Transcript

A leak from the bathroom upstairs leaves a stain on the hall ceiling below. The damage covers part of the ceiling, and the scope should too.

Measure the rooms with the vPlan app, then open the plan in the web editor.

Select the hall. Record water, minor, with the ceiling and paint affected, and note the size: a stain about three feet across, near the bathroom wall.

In the Scope tab, the Mitigation draft is small: open the wet ceiling drywall at the stain and dry the joist bay above. Some losses need very little mitigation.

Switch to Reconstruction and draft. The ceiling repair is the stained area, a few square feet, not the whole ceiling.

When a quantity is a judgement rather than a measure, the draft leaves it as a number and says how it was reached. Lines that follow the room keep a formula.

The paint is different: sealing and painting the whole ceiling, so it matches. The line says why.

Check the quantities and change any you'd write differently. A typed number replaces the formula; the formula field shows the measurements you can use.

Here there are two trades, drywall and painting, so no overhead and profit.

Next: mold, with containment and air scrubbing.