Category 3 Water Mitigation Estimate: Sewage Backup in a Basement
Scoping & estimating · video 1 of 8 · 2:33 · Watch on YouTube
How to write a Category 3 water mitigation estimate for a sewage backup in a finished basement with vPlan AR: record the damage, then Draft with AI writes the mitigation scope the way the IICRC S500 standard lays it out (contaminated porous materials removed, containment, HEPA air filtration, drying equipment sized from the room), and you export it as its own estimate, with no overhead and profit.
In this video
- Capture the basement with the vPlan AR app: a LiDAR scan on iPhone Pro and iPad Pro, or Measure Room (beta) on Android and other iPhones
- Record the damage under Condition & Damage, and the source and category in the notes
- The Scope tab keeps three separate estimates: Mitigation, Reconstruction and Remodel
- Draft with AI writes the mitigation scope following IICRC S500: Category 3 porous materials removed, a flood cut above the wet line, extraction, antimicrobial, containment
- Drying equipment sized from the room: air movers along the walls, dehumidifiers by AHAM rating, HEPA air scrubbers at four air changes an hour
- Each quantity is a formula over the room; Check on site lists what to confirm
- Export the Mitigation estimate: no overhead and profit on mitigation
Transcript
A sewage backup in a finished basement is a Category 3 loss. The first estimate you write is the mitigation: getting the water and the contaminated materials out, and drying the room.
On site, scan the basement with the vPlan app: the LiDAR scan on an iPhone Pro or iPad Pro, or Measure Room on Android and other iPhones. The plan opens here, in the web editor.
Select the family room, and under Condition and Damage record what you found: damaged, water, severe, with the carpet, drywall, insulation and baseboard affected.
Note what the chips can't say: sewage from the floor drain, Category 3, about two inches across the carpet, wicking eighteen inches up the drywall.
Now open the Scope tab. It keeps three separate estimates: Mitigation, Reconstruction and Remodel. Mitigation is open.
Draft with AI writes the mitigation scope from the damage you recorded and the room's measurements. It uses one AI message.
It follows the IICRC S500 standard for water damage. Category 3 means the porous materials the sewage reached come out, they aren't dried: carpet and pad, baseboard, a flood cut above the wet line, and the insulation behind it. Then extraction and antimicrobial, inside containment.
The drying equipment is sized from the room. Air movers at one per fourteen feet of wall, the dehumidifier by its AHAM rating, and for Category 3, HEPA air scrubbers at four air changes an hour.
Each line's quantity is a formula over the room's measurements, so if a wall moves, the line follows. And Check on site lists what to confirm: the category and class of water, the moisture readings, the days of drying.
Click Export, then Cost Estimate, and pick the Mitigation estimate. There's no overhead and profit on mitigation: it's done with your own crews and equipment.
Next: the rebuild, as its own estimate.


