Back to Blog
How-To6 min read

Floor Plan with Photos: How to Pin Room Photos Where You Took Them

A photo is only useful evidence if the reader knows where it was taken. Here is how to tie room photos to a measured floor plan, with the spot and direction of each one, and get them into a PDF report and a shared link.

vPlan AR Team

vPlan AR

A floor plan with photos ties each picture to the room it shows and the spot it was taken from, so whoever reads the report can see where the camera stood and which way it faced. In vPlan AR, photos belong to rooms, can be pinned on the measured plan with their direction, print in a numbered photo appendix with a link and QR code to each full image, and show on the plan's share page.

This guide covers taking photos during a scan, pinning them afterwards, 360° photos, getting them into a PDF report, and sharing them, along with what the spreadsheet exports leave out.

Why Photos Need a Place on the Plan

A folder of forty photos named IMG_4012 to IMG_4051 tells the reader very little. Which bedroom is the stained ceiling in? Was the crack on the north wall or the south one? Home inspectors, adjusters, property managers documenting move-in and move-out, and agents all run into the same problem: the photo shows what, but not where.

Putting each photo on a measured plan answers where. A numbered pin in the right room, with a wedge showing the direction the camera faced, lets someone who has never been to the property match the photo to the wall, and it holds up better when a finding, a claim or a deposit deduction is questioned later.

Photos While You Scan

On Pro and Business, the iPhone app takes room photos while you scan with LiDAR and pins them where you stood, facing the way you looked, so they arrive on the plan already placed. Faces in these automatic photos are blurred.

You can add more photos to a room afterwards, on the phone or in the web editor, and pin those yourself. Not sure your phone can scan? Our list of which iPhones have LiDAR has every model.

Pinning Photos on the Plan

In the web editor, open the Photos tab, pick the room and click a photo, then click Pin on plan. Click the plan where you stood when you took it, then click the way the camera faced; press Enter to leave it without a direction, or Esc to stop. Every plan can add and pin photos: the Free plan takes up to 3 photos per room, and Pro and Business have no per-room limit.

The pin shows the photo's number, the same number it has in the PDF photo appendix, and a wedge for the direction. Click a pin to see the photo or open it full size; drag it to move it, and it keeps its direction. Pins belong to the level they were placed on, plan sheets exported with photos print them at the same spot, and the Show photo pins on the plan switch turns them off when you want a clean drawing.

360° Photos

A 360° photo, the equirectangular image that cameras such as Ricoh Theta and Insta360 export, goes into the Photos tab like any other and is marked 360°. On Pro and Business, View 360° opens it to look around inside, starting the way the camera faced. Once it is pinned with a direction, the viewer tells you which way you are facing on the plan as you turn.

One 360° photo per room often replaces five or six flat ones for a walkthrough record, and a pinned panorama is easier to read than a gallery because the plan shows where it sits. The PDF prints it flat.

Photos in the PDF Report

The PDF plan set can end with a photo appendix. Photos are numbered to match the pins on the plan, and each one prints with a View full image link, a short web address and a QR code, so a printed copy still leads to the photo. The page it opens shows the photo with its caption, room and date and a Download button, and when the photo is pinned, a small plan of the level marking where it was taken and which way the camera faced.

On Pro, the Damage / Scope Report puts each room's condition, damage and photos together, which is the format most inspection and claim files want; our guides to floor plans in home inspection reports and water damage scope reports walk through it. If a link should stop working, Reset photo links in the project's Photos panel replaces them.

For the record: photos added on the web are stored at up to 2560 pixels on the long edge, the camera details inside the file (such as GPS location) are dropped, and each photo's SHA-256 fingerprint is recorded when it is uploaded. On Pro and Business you can keep originals instead.

Sharing the Plan and Photos

On Pro and Business, a share link opens the plan in any browser with no account, and the share page includes the photo grid: each thumbnail opens the full photo, and a 360° photo opens in the viewer. It suits a client, a tenant or a carrier who needs to look rather than print. Our guide to shareable floor plan links covers the rest of the share page.

What Stays Out of the Spreadsheets

The Excel and CSV exports, the room schedules and the Measurement Sheets, list measurements: each room's area, perimeter, ceiling height, wall area and openings. They don't carry the photos. When someone needs both in one place, send the PDF with its photo appendix, or the share link. See how this fits the job for home inspectors, property managers and insurance adjusters.

Frequently Asked Questions

How do I add photos to a floor plan?

In vPlan AR's web editor, open the Photos tab, pick the room and add the photo, then choose Pin on plan, click where you stood and click the way the camera faced. Free takes up to 3 photos per room; on Pro and Business there is no per-room limit, and the iPhone app also takes room photos during a LiDAR scan and pins them for you.

Can a floor plan show where each photo was taken?

Yes. A pinned photo shows on the plan as a numbered marker with a wedge for the direction the camera faced, and the same number is used in the PDF photo appendix, so readers can match each photo to its spot.

Can I put the floor plan and photos in one PDF?

Yes. The PDF plan set can end with a numbered photo appendix, each photo with a link and QR code to the full image, and on Pro the Damage / Scope Report shows each room's condition and damage with its photos.

Do the CSV and Excel exports include photos?

No. The spreadsheets list measurements such as area, perimeter, ceiling height and openings. Use the PDF photo appendix or a share link when the reader needs the photos too.

Can a floor plan include 360° photos?

Yes. Add an equirectangular 360° image to a room and pin it on the plan with its direction. On Pro and Business it opens in a 360° viewer in the editor and on the share page; the PDF prints it flat.

ShareTwitterLinkedIn

About the Author

vPlan AR Team

vPlan AR

The vPlan AR team builds tools for professionals who measure, document, and estimate every day — combining LiDAR scanning, AR, and smart export workflows into one mobile-first platform.