Stairs in a Floor Plan: Risers, Treads and IRC / IBC Code Checks

Architects & designers · video 2 of 8 · 1:18 · Watch on YouTube

How to add a stair between two levels in vPlan AR: place a straight, L-shaped, U-shaped or spiral stair, set the levels it joins, check the riser, tread, width, landing, flight and headroom against the IRC or IBC, fit it to the floor-to-floor height, and see the opening vPlan draws in the floor above. Stairs are on Pro and Business.

In this video

  1. Place a stair from Stairs on the left, or press S: straight, L-shaped, U-shaped or spiral (R turns it)
  2. Set the levels it joins: vPlan works out the floor-to-floor height and the risers
  3. Pick the code, IRC or IBC: the checks compare riser, tread, width, landing, flight and headroom with its limits
  4. Fit to levels sets the risers and the run when the stair doesn't fit
  5. vPlan draws the stair's opening on the level above; draw a floor opening for a two-storey space
  6. Stairs and floor openings are on Pro and Business

Transcript

A stair joins two levels, and its numbers have to work. Here's how vPlan places one and checks it.

Click Stairs on the left, or press S, and pick a type: straight, L-shaped, U-shaped or spiral. Click to place it.

Under Properties, set where it goes: up from the main level to level 2. vPlan works out the floor-to-floor height and the risers.

Pick the code: IRC for residential, or IBC for commercial. The code checks compare the riser, tread, width, landing, flight and headroom with its limits. They're warnings: the call is yours.

When the stair doesn't fit the levels, Fit to levels sets the risers and the run for you.

Change the width, the tread depth or which way it turns, and the checks follow.

On the level above, vPlan draws the opening the stair needs. For a two-storey space, draw a floor opening and mark it open to below.

Stairs and floor openings are on Pro and Business.

Next: lay out the drawings you print.