How to Draw a Multi-Level Floor Plan: Levels, Ceiling Heights and Floor Structure
Architects & designers · video 1 of 8 · 1:31 · Watch on YouTube
How to draw a multi-level floor plan in vPlan AR: add a level from a preset, draw the upper floor over the underlay of the level below, switch levels, set each level's ceiling height and floor structure, align levels, and see them stacked in 3D.
In this video
- Each floor is a level, stacked at its real height
- Add a level from the Levels tab: a preset like Level 2, with its elevation, ceiling height and floor structure
- The underlay draws the level below faintly, and new walls snap to its walls
- Switch levels with the Level picker, or Page Up and Page Down
- Edit a level: the floor structure (an I-joist, joists or a slab) sets the floor-to-floor height
- Align levels snaps a level's walls to the level below, or align it by hand
- In 3D, the levels stack at their heights
Transcript
Most buildings have more than one floor. In vPlan, each floor is a level, stacked at its real height. Here's a two-storey house.
Scan each floor with the vPlan app, or draw it here. This is the main level.
Open the Levels tab and click the plus to add a level. Pick a preset, like Level 2. Its elevation stacks on the level below, and it has its own ceiling height and floor structure.
The new level starts empty. The underlay draws the level below faintly under it, and new walls snap to its walls. Draw the upper floor right over it.
Switch levels with the Level picker at the top, or with Page Up and Page Down.
To change a level's heights, open its settings and choose Edit. The floor structure, like an I-joist, sets the floor-to-floor height. When a ceiling changes, the levels above can move with it.
Scanned floors are lined up for you. If one is off, Align levels snaps its walls to the level below, or you can align it by hand.
Click 3D, and the levels stack at their heights.
Next: a stair between the floors.


