Trace an Old Floor Plan Drawing: Import, Scale and Square Up
Architects & designers · video 8 of 8 · 1:13 · Watch on YouTube
How to start a floor plan from an old drawing in vPlan AR: import a scan or a photo of the drawing, set its scale from a dimension you know, lower its opacity and draw the walls over it, then hide or remove it. If the drawing was askew, Square up turns the plan square to the page, and the N button sets north. Check the drawing against the site before you build on it: measure with the vPlan AR app.
In this video
- Import image on the left: a scan or a photo of the drawing
- Set scale: click the two ends of a dimension you know, and type its real length
- Lower the opacity and draw the walls over it, typing the lengths the drawing gives
- Hide the image, or remove it, when you're done
- Square up turns an askew plan square to the page; the N button sets north
- Check the drawing against the site before you build on it
Transcript
Working from an old floor plan, or a drawing from the permit file? Trace it.
Click Import image on the left and pick a scan or a photo of the drawing.
Click Set scale, click the two ends of a dimension you know, and type its real length.
Lower the opacity, and draw the walls over it, typing the lengths where the drawing gives them.
When you're done, hide the image, or remove it.
If the plan sits at an angle, Square up turns it square to the page. Set north with the N button.
Then add levels, stairs and sheets, as in the rest of this series. Before you build on it, check the drawing against the site: measure with the vPlan app.
That's the series. Find all the videos at vplan.ai.


