How to Measure a Room with Your Phone (iPhone or Android)
You can measure a room with the phone in your pocket. Here is how, whether it has a LiDAR scanner or not, how to get good numbers, how to check them, and what you end up with.
vPlan AR Team
vPlan AR
You can measure a room with your phone in three ways. An iPhone Pro or iPad Pro with a LiDAR scanner scans the room as you walk and draws the walls, doors and windows itself. Any other iPhone, and most Android phones, can measure with the camera: you tap the corners where the walls meet the floor, the top of a wall and the corners of each door and window. And with no app at all, a tape measure and the length times the width still gives you the area.
This guide covers each one, how to get good numbers from it, and how to check them. The examples use vPlan AR, which does the first two on iPhone and iPad and the second on Android, but the technique applies to any room measuring app.
Which Method Your Phone Can Use
Only Pro iPhones have LiDAR: the iPhone 12 Pro and every newer Pro and Pro Max model, and iPad Pro from 2020 onward. Our list of which iPhones have LiDAR has every model with a yes or no. Android phones have no LiDAR scanner, so they measure with the camera, using Google Play Services for AR on supported phones running Android 7.0 or later.
In vPlan AR you don't have to choose: the Scan tab opens the right one for your phone. LiDAR iPhones get Scan; iPhones without LiDAR and Android phones get Measure Room, which is in beta.
With LiDAR: Scan the Room
Start in a doorway and walk slowly around the room, pointing the phone at the walls. Walls, doors, windows and openings appear on a live 3D model as they are found. Aim at the corners and the doorways as you pass them, and keep moving steadily rather than sweeping fast. A room takes one to two minutes.
Scanned slowly with corners and doorways captured, room dimensions are typically within 1–2 cm (under an inch) per room dimension. Mirrors, glass and heavy clutter make it harder; a wall the scan got wrong can be corrected in the editor afterwards. For a whole house, scan room after room and floor after floor in one session, and the levels line up; our multi-room scanning walkthrough covers the order and the tricky spots.
Without LiDAR: Measure with the Camera
Camera measuring works differently: the phone tracks the floor, and you mark the room's shape on it. In vPlan AR's Measure Room, point the camera at the floor and move slowly until the app has found it. Then stand 1 to 2 m (3 to 6 ft) from each corner, aim the cross where the walls meet the floor, and tap. The app warns you when a corner is too far away to measure well, and Undo takes back the last point. If a corner is behind furniture, tap Hidden Corner and tap a point at the bottom of each of the two walls next to it; the corner goes where the lines meet. Close the room when you are back at the first corner.
Next, aim at the top of any wall, where it meets the ceiling, and tap: the walls rise to that height. Then mark each door and window by a bottom corner on one side and the top corner on the other, and say what it is; its width and height show as you aim. After each room, the app asks whether you know one wall's length: tap the wall, type the tape measurement, and the plan is scaled to it. Measure the next room from where you stand and the rooms line up on one plan, joined along the walls they share. The plan is saved when you finish.
Most of the error comes from where you stand and how you aim. Standing too far from a corner, or aiming at the floor at a shallow angle, moves the point; so does a corner hidden behind furniture. Get close, aim at the line where the wall meets the floor, and give the phone a moment to settle before you tap.
Check the Numbers with a Tape
Whatever the method, check a wall or two with a tape before you rely on the numbers, especially with camera measuring, which is still in beta in vPlan AR. Pick the longest wall in the room and one short one. If a length is off, type the tape length when Measure Room asks after the room, or tap that wall in the editor and type it, or drag a corner into place.
For anything official, know what the number is for. Room-by-room measurements are taken inside the walls, which is right for flooring, paint and repair estimates. A listing's gross living area under ANSI Z765 is measured from the outside of the house; our ANSI Z765 guide explains the difference.
No App? Tape and Draw
A tape measure still works. Measure each wall at floor level, corner to corner, and the ceiling height; for a rectangular room, the length times the width is the floor area. Split an L-shaped room into two rectangles and add them. The free square footage calculator adds up the rooms, and the web editor at vplan.ai lets you draw the plan in a browser from your measurements.
What You Get from a Measured Room
Once a room is measured, the numbers are on the plan: each room's area, perimeter and ceiling height, the total square footage, and door and window sizes. In vPlan AR the same plan is a 3D model and exports as a true-scale PDF on every plan, with DXF, 3D files, spreadsheets and the square footage (GLA) report on Pro. From there it is a short step to flooring, paint or drywall quantities; our guide to takeoffs from a floor plan works through one.
Frequently Asked Questions
Can I measure a room with my phone?
Yes. A LiDAR iPhone Pro or iPad Pro scans the room as you walk. Other iPhones and most Android phones measure with the camera: you tap the floor corners, the top of a wall and each door and window. Check a wall or two with a tape before you rely on the numbers.
How do I measure a room with an iPhone?
On an iPhone 12 Pro or newer Pro model, scan it: walk slowly around the room with the camera on the walls and the app draws the plan. On other iPhones, measure with the camera by tapping each corner where the walls meet the floor, then the top of a wall, then each door and window.
How do I measure a room with an Android phone?
With a camera measuring app on a phone that supports Google Play Services for AR. In vPlan AR, tap each corner where the walls meet the floor, aim at the top of a wall for the height, then mark the doors and windows. Stand 1 to 2 m from each corner when you tap.
Do I need LiDAR to measure a room with my phone?
No, but it helps. LiDAR scanning draws the walls for you and is the most accurate; without it, camera measuring works from the floor corners you tap. Either way, check a wall with a tape.
Can my phone work out the square footage of a room?
Yes. Once the room is measured, the app works out its floor area, perimeter and ceiling height, and adds the rooms up into the total square footage.